Ever tried to split a thick piece of wood in half with a dull blade? It’s frustrating, right? The wood fights back, the cut wanders, and you end up with a mess. Resawing, or cutting a thick board into thinner ones, is a common task for woodworkers. But it can quickly turn into a woodworking nightmare if you don’t have the right tool. The band saw is your best friend for this job, but only if you have the perfect blade.
Choosing the right band saw blade for resawing can be tricky. There are different teeth, widths, and materials to consider. The wrong blade can lead to burns, kickback, and wasted wood. This guide is here to help! We’ll break down everything you need to know so you can choose the best blade for your project. We’ll also cover how to get the best results.
By the end of this post, you’ll understand how to pick a blade that works best for you. You’ll also learn how to use it safely and efficiently. Get ready to level up your resawing skills and make clean, accurate cuts every time. Let’s dive in and find the perfect band saw blade for resawing!
Our Top 5 Band Saw Blade For Resawing Recommendations at a Glance
Top 5 Band Saw Blade For Resawing Detailed Reviews
1. Timber Wolf Veneer Resawing Band Saw Blade 131.5 * 1/2′ x 3/4 VPC (131.5” Long)
Rating: 8.7/10
The Timber Wolf Veneer Resawing Band Saw Blade is built for precision. It is 131.5 inches long. It has a 1/2-inch width and a 3/4 VPC tooth design. This blade is perfect for slicing veneers, resawing, and ripping wood. You can also cut gentle curves. It works best with kiln-dried, domestic wood and softer exotic woods. Remember, this blade is designed for specific uses. Always follow the safety instructions.
What We Like:
- It works well for making thin veneers.
- The blade is great for resawing wood.
- You can cut curves with this blade.
- It cuts through kiln-dried wood easily.
- The variable positive claw (VPC) tooth design makes clean cuts.
What Could Be Improved:
- It cannot be used with wet wood.
- You can’t cut logs or limbs unless they are dried to 10%.
- The depth of cut is limited based on the wood type.
This band saw blade is a good choice if you work with dry wood. It’s perfect for projects that need thin veneers or curved cuts. Keep in mind the wood type and dryness when you use this blade.
2. Supercut 105-inch x 5/8-inch x .025 x 3 TPI Woodsaver Carbide Resaw Bandsaw Blade for resawing Exotic Hardwoods. (Made in USA)
Rating: 9.1/10
Are you ready to slice through tough exotic hardwoods? The Supercut 105-inch x 5/8-inch x .025 x 3 TPI Woodsaver Carbide Resaw Bandsaw Blade is built for the job. This blade is made in the USA. It is designed to make resawing easier and more efficient. This blade helps you get the most out of your expensive wood. It is a great tool for any woodworker.
What We Like:
- Made in the USA: This blade is 100% made in the USA.
- Lifetime Warranty: The blade has a limited lifetime weld warranty. You can trust it will last.
- Thin Kerf: The thin kerf design saves your wood. It reduces waste.
- Carbide Impregnation: The blade uses a special process. This makes the blade stronger.
What Could Be Improved:
- No Cons were found.
The Supercut blade is a good option for woodworkers. It is a reliable and efficient tool for resawing hardwoods. This blade will help you with your projects.
3. Timber Wolf Veneer Resawing Band Saw Blade 133″ * 1/2′ x 3/4 VPC
Rating: 8.9/10
The Timber Wolf Veneer Resawing Band Saw Blade is designed for woodworkers. It is great for making veneers, resawing, ripping, and cutting curves. This blade is made for kiln-dried wood. It works well on domestic hardwoods and softer exotic woods. The blade has a variable positive claw (VPC) tooth design. It is 1/2 inch wide and 133 inches long.
What We Like:
- It’s great for slicing veneers.
- It can resaw, rip, and cut curves.
- The VPC tooth design helps with cutting.
- It works well on kiln-dried hardwoods and softwoods.
- The blade can cut up to 8 inches deep in hardwood and 6 inches in softwood.
What Could Be Improved:
- This blade is not for wet wood or logs.
- You cannot use it with wood that is not dried to 10%.
This Timber Wolf blade is a good choice for woodworkers who need to cut thin veneers or resaw boards. Make sure your wood is dry before using this blade.
4. Timber Wolf Veneer Resawing Band Saw Blade 111″ * 1/2′ x 3/4 VPC
Rating: 9.2/10
The Timber Wolf Veneer Resawing Band Saw Blade is a specialized blade for your band saw. It’s designed for cutting veneers, resawing, and ripping wood. You can also cut gentle curves. This blade is perfect for kiln-dried domestic wood and softer exotic woods. It has a variable positive claw (VPC) tooth design. This blade is 111 inches long, 1/2 inch wide, and has a 3/4 tooth per inch (TPI) count.
What We Like:
- The blade excels at slicing veneers.
- It works well for resawing and ripping lumber.
- You can cut gentle curves with it.
- It’s great for kiln-dried domestic and softer exotic woods.
- It has a variable positive claw (VPC) tooth design.
- The blade’s .025 thickness and .039 kerf deliver clean cuts.
- The 6.5-degree hook angle helps with efficient cutting.
- It can cut hardwoods up to 8 inches deep.
- It can cut softwoods up to 6 inches deep.
What Could Be Improved:
- This blade is not for wet wood or logs.
- You should only use it on wood dried to 10% moisture content.
- It is not suitable for all types of wood.
- The 2-1/2 inch radius of cut might limit some projects.
This Timber Wolf blade is a good choice for specific woodworking tasks. If you need to cut veneers or resaw lumber, this blade can help. Make sure your wood is properly dried before you start.
5. 3423VPC 93.5″ by 3/4″ Timber Wolf Bandsaw Silicone Steel Low Tension Resaw Blade
Rating: 9.1/10
The 3423VPC 93.5″ by 3/4″ Timber Wolf Bandsaw Blade is tough. It is for resawing wood. This blade is made for low tension bandsaws. It is made by Timber Wolf. This blade cuts wood very well. It is made to last a long time.
What We Like:
- The teeth are 50% sharper. Other blades may not be as sharp.
- The blade is hardened throughout. Competitor blades may not be hardened this way.
- The tooth edge is harder. This means it stays sharp longer.
- The steel is more flexible. This helps the blade last longer.
- The blade runs cooler. This helps it cut better.
What Could Be Improved:
- (No cons provided.)
This Timber Wolf blade is a great choice for cutting wood. The blade is designed to be sharp and last a long time. You will like using this blade.
Slice Through Wood Like Butter: Your Guide to Resawing Band Saw Blades
Choosing the right band saw blade for resawing can be tough. This guide will help you pick the best one for your projects. Resawing means cutting a thick piece of wood into thinner pieces. You want a blade that’s sharp and strong.
Key Features to Look For
The most important things to consider are the blade’s teeth and width.
Tooth Count (TPI – Teeth Per Inch):
Lower TPI means fewer teeth per inch. For resawing, you want a blade with a low TPI, usually 2-3 TPI. This allows the blade to remove wood quickly. It also helps prevent the blade from clogging. Higher TPI blades are for cutting curves.
Blade Width:
Wider blades are more stable. They can cut straighter lines. For resawing, a blade that’s at least 1/2 inch wide is a good start. If you have a large band saw, you might even use a 3/4 inch or 1-inch blade.
Tooth Shape:
Look for blades with a hook tooth design. This tooth shape is good for removing wood quickly. It’s ideal for resawing. Some blades have a skip tooth design, which helps clear sawdust.
Blade Material:
This is very important. We will talk about it in the next section.
Important Materials
The material of the blade decides how long it lasts and how well it cuts.
Carbon Steel:
Carbon steel blades are the cheapest. They are good for beginners. However, they get dull quickly. You will need to replace them often.
Bi-Metal Blades:
Bi-metal blades are a better choice. They have a body made of flexible steel. The teeth are made of high-speed steel (HSS). HSS is much harder. These blades last longer and stay sharp better than carbon steel.
Tungsten Carbide Blades:
These are the best. They are very expensive. They have teeth made of tungsten carbide. Carbide is super hard. These blades last the longest and can cut through tough woods. They are great for professionals.
Factors That Improve or Reduce Quality
Things to consider that will impact your success.
Welding:
The weld is where the blade is joined to form a loop. A good weld is strong. It won’t break while you are cutting. Make sure the blade has a good weld.
Blade Tension:
The band saw needs to be set up correctly. This includes the blade tension. Too little tension and the blade will wander. Too much tension and the blade might break. Check your band saw manual for the right tension settings.
Saw Guides:
Good saw guides help keep the blade straight. They also reduce friction. Make sure your band saw guides are in good shape. Adjust them correctly for the blade’s width.
Wood Type:
Hard woods like oak are harder to cut. Soft woods like pine are easier. Choose a blade that is right for the wood you will be cutting.
User Experience and Use Cases
Resawing can be used for many projects.
Furniture Making:
Resawing is perfect for making thin boards for furniture. You can create beautiful table tops or cabinet doors.
Lumber Creation:
If you need custom-sized lumber, resawing is your friend. You can make wood that fits your exact needs.
Woodworking Projects:
You can also resaw for smaller projects. This includes cutting thin veneers or creating decorative pieces.
Tips for Success:
- Go slow and steady.
- Use a fence to guide your cuts.
- Always wear safety glasses.
- Use a push stick to keep your hands away from the blade.
Frequently Asked Questions (FAQ)
Q: What does “TPI” mean?
A: TPI means “Teeth Per Inch.” It tells you how many teeth are on the blade.
Q: What TPI should I use for resawing?
A: Use a blade with 2-3 TPI for resawing.
Q: What is the best material for a resawing blade?
A: Bi-metal or Tungsten Carbide blades are best.
Q: How wide should my blade be?
A: At least 1/2 inch is good for most resawing. Wider blades give more stability.
Q: What is a hook tooth?
A: A hook tooth is a tooth shape that helps remove wood quickly.
Q: How do I tension the blade?
A: Check your band saw manual for the correct tension settings for your blade size.
Q: What should I do if the blade wanders while cutting?
A: Check your blade tension and your saw guides. Make sure they are set up correctly.
Q: Are carbon steel blades good for resawing?
A: They work, but they dull faster. You will replace them more often.
Q: What are saw guides?
A: Saw guides are parts of the saw that keep the blade straight and reduce friction.
Q: Can I resaw any type of wood?
A: Yes, but the type of wood will affect how quickly you can cut it. Hardwoods require a better blade.
In conclusion, every product has unique features and benefits. We hope this review helps you decide if it meets your needs. An informed choice ensures the best experience.
If you have any questions or feedback, please share them in the comments. Your input helps everyone. Thank you for reading.
Hi, I’m Tom Scalisi, and welcome to The Saw Blog! I started this blog to share my hands-on experience and insights about woodworking tools—especially saws and saw blades. Over the years, I’ve had the chance to work with a wide range of tools, and I’m here to help both professionals and hobbyists make informed decisions when it comes to selecting and using their equipment. Whether you’re looking for in-depth reviews, tips, or just advice on how to get the best performance out of your tools, you’ll find it here. I’m excited to be part of your woodworking journey!